Professional wireless transmitter / receiver system for phantom powered lavaliere / headset XLR microphones. Dedicated to making your favourite body worn microphone wireless, using professional UHF wireless technology. Adopting digital audio transmission technology with infrared automatic matching, 48KHz sampling frequency, ultra-short audio delay and provides you with recording-level quality. Preset 16 groups of adjustable channels to solve possible interference problems.
Supports 48V Phantom Power Supply: Turn off the phantom power switch, the transmitter can be used for 5-6 hours with dynamic handheld microphone. Turn on the phantom power and transmitter can be used for 2-3 hours with lavaliere condenser microphone. The actual usage time may vary depending on your microphone.
The product comes with 2 detachable antennas. The wireless transmission distance can reach 20M (65FT) without antenna and 50M (165FT) with antennas. The lock design of XLR plug protects transmitter from being disconnected during use. The indicators include power, 48V phantom power, low voltage and charging indicator, so you know the working status of both transmitter and receiver.
Plug And Play: This system is small and exquisite with no complicated settings and the transmitter and receiver automatically pair when turned on. Support up to 5 systems to be used on the same occasion.
With 30 days no reason return and one year warranty there is no worry if product is as good as we advertise. We are very confident the quality of product is above and beyond your expectations. Guaranteed best choice for your microphone going wireless.
Wide Compatibility: The system adopts rechargeable lithium battery, it takes 2 hours to fully charge. The receiver of this system is designed with two kinds of plugs, XLR male plug and 1/4'' male plug. Two kinds of plugs ensure that they can be used on most of your equipment, such as mixers, amplifiers, speakers, etc. This system is suitable for recording studios, theaters, lectures, outdoors, venues, weddings, mobile DJ's and so on.
Transmitter Specification
- Frequency Band: 606-614 MHz
- Channels: 16
- Deviation: ±48Khz
- Input: 3 pin XLR female (with lock)
- RF output: 10mW
- 48v Phantom power
- Control: Power on/off, 48v on/off
- Indicator light: LED (PO/48V/LO/CHR)
- Antenna: 1/4 wavelength
- Power supply: 3.7v Lithium battery
- Working time: 5 hours
- Dimensions: 120mm x 41mm x 31mm
Receiver Specification
- Frequency Band: 606-614 MHz
- Channels: 16
- Modulation: pi/4DQPSK
- Output: 3 pin XLR male / 6.35mm Jack
- Transmission delay: <6ms
- Sampling rate: 48 KHz
- Frequency response: 60Hz-15Khz ±2db
- Distortion: <0.8% (1KHz)
- Antenna: 1/4 wavelength
- Power supply: 3.7v Lithium battery
- Working time: 6 hours
- Dimensions: 116mm x 41mm x 31mm
