Shure 4 pin mini XLR TA4F (TQG) Microphone Adapter for Wireless Radio Body Pack Transmitters
Convert Shure lavaliere / ear hook condenser microphones for connection to different radio transmitters. The adapter also works with other brands of microphone using same 4 pin mini XLR connector.
PLEASE NOTE! This adapter only works with positive polarity microphones. Different Shure microphones have positive or negative polarity depending on type and model. This adapter is for positive condenser lavaliere / ear hook / head worn microphones. If unsure please check microphone manual specification. Check the 'polarity is positive pressure diaphragm to produce positive voltage on pin 3 with respect to pin 1'.
Compatible BRAND microphones - 4 pin mini XLR connector (TA4F) works with Shure / Anchor Audio / Beyerdynamic / Carvin / JTS / Line 6 / Sabine and Trantec microphones. Not compatible BRAND microphones - 4 pin mini XLR connector (TA4F) will not work with these brands - Electrovoice / HME / Lightspeed / Paso / Relacart / Revolabs / Telex / Toa / Vega microphones. Adapters for these brands are available in our store.
Shure manufacture Wired/Beta handheld, head-worn and lavalier microphones. They also manufacture a Wireless range using the exact same connector. Each have their own type of use and have different wiring, polarity and voltage. This adapter is for use with Shure Wireless lavalier/headset microphones containing the prefix TQG only. This will NOT work with WL lavalier or WBH headsets (Cardioid) or Beta hand-held dynamic microphones. (see listing below)
Used to convert the TQG/TA4F (tinyQ) 4 pin mini XLR connector for use with other Make/Model wireless microphone systems and body pack transmitters.
The Micronic microphone adapters have proved to be a very prominent and reliable product. These adapters are hand made and been developed over years of hands on experience. Each one is checked and tested to prevent any faults from occurring later after a reasonable amount of use. Wired to an exact specification for each Make/Model of transmitter in our range.
Different makes/brands of manufacturer use different connectors and wiring. Some are identical Whilst others are completely different. The adapter may look identical on the outside but inside wiring is completely different. Make sure the adapter chosen is same Make/Model and connector to be used.
All connectors are of the highest quality with 15cm length of flexible 4.8mm thick microphone cable.