These Micronic adapters are compatible with the following Audio Technica transmitters - ATW-T27, ATW-T31, ATW-T35, ATW-T51, ATW-T75, ATW-T201, ATW-T210, ATW-T210a, ESW-T211, ATW-T310, ATW-T310b, ATW-T601, ATW-T701, AEW-T1000, AEW-T1000a, ATW-T1001, ATW-T1801 for use with 200 Series, 600 Series, 700 Series, 1000 Series, 1100 Series, 1200 Series, 1400 Series, 1800 Series, 2000 Series, 2000A Series, 3000 Series, 3000A Series, 4000 Series, 5000 Series, 7000 Series and System 10, System 10 Pro. All of the above models use what is known as the UniPak 4 Pin Hirose HR10A-7P-4S connector. All adapters come with the HR10A-7P-4S snap fit female connector on one end and your chosen socket on other end. All you need to do is select adapter with the same connection as your microphone plug so that it will fit and convert it to the Audio Technica 4 Pin connector.
The Micronic microphone adapter has proved to be a very prominent and reliable product. These adapters have been developed over years of experience to incorporate all the pro's and con's of using adapter converters. Each and every adapter is hand built by our qualified engineers checking for any minor fault that may cause problems later. Each adapter is wired to an exact specification for each brand of microphone and connection.
Each brand of manufacturer use different connectors, wiring and operating voltage. Each adapter may look identical to the other but is very different inside and must be the correct adapter for your make of microphone. Make sure that when choosing your adapter you choose the same connector to match your microphone. If unsure when selecting your connector you will see a photo to compare it with your microphone. Different connectors vary in cost and this reflects in the cost of each adapter.
Every adapter sold here has been made for use with Audio Technica body pack transmitters only and will not work for any other make or model.
All connectors are of the highest quality with tough flexible 4.5mm diameter cable approx 15cm in length.